Short answer: Limewash can go on a ceiling as long as the surface is absorbent and sound, such as lime plaster or a suitable mineral base coat. Old ceilings often carry soft distemper or modern paint, which has to be dealt with first because limewash will not hold onto them reliably. The work is slower than walls because it is done overhead in several thin coats, with the whole room protected from drips.
Why people limewash a ceiling
Many clients start by limewashing the walls and then realise a flat white emulsion ceiling looks out of place above them. Carrying the limewash up and over the ceiling, in the same colour or a paler mix, makes the room feel finished as one piece. In older houses with lime plaster ceilings, limewash is also the traditional finish, and it lets the old plaster breathe in the way it was designed to.
What is on your ceiling now matters
This is the first thing we check. Common situations we find:
- Old distemper. Soft distemper is a chalky, old fashioned ceiling paint that rubs off on your fingers. Nothing sticks well to it, so it has to be washed off before limewash goes on.
- Modern emulsion. Plastic based paint stops limewash soaking in. Depending on the ceiling, it either needs removing or a suitable base coat applying over it. This depends on the surface and is checked first.
- Lath and plaster. Old ceilings made of thin timber strips (laths) with lime plaster pushed through them. If the plaster has come away from the laths, it can sag. We check for movement and cracks before anything else, and if repairs are needed they come first.
- Plasterboard. Needs a mineral base coat so the limewash has something to bond to.
Working overhead safely
Ceilings are hard work and we plan them properly. We use stable platforms or towers rather than balancing on chairs, and we ask for the room to be emptied where possible. Everything left in the room is sheeted. Floors are covered edge to edge, because limewash is thin and it does drip and spatter. Ceiling fittings and smoke alarms need taking down or covering; where an electrician is needed to drop fittings, we agree that with you or your builder before we arrive.
Limewash is alkaline, which means it can sting eyes. Working overhead makes that a bigger risk, so our team wear eye protection throughout.
Colour on a ceiling
A ceiling can be the same colour as the walls, a paler version of it, or plain white limewash. We usually suggest testing two options on a small section of ceiling and letting them dry fully before deciding. Limewash dries a lot paler than it goes on, so a test patch avoids surprises. If you want a sample in your colour before we visit, Zavoré can make sample boards.
Listed and older homes
If your home is a listed building, listed building consent can be needed for internal work, including changes to historic ceilings. Ask your local council’s conservation officer before booking. We are happy to share details of the method and materials to help that conversation. You can read more about our approach to lime plaster and about decorative ceilings in general.
Send us a few photos of the ceiling, including any cracks or flaking, plus rough room sizes, and we will get a free online quote. Or call 07592 929191 or email info@finestplastering.co.uk. We are in Birmingham and work across the UK; see where we work.
Questions we get asked
Will limewash hide cracks in my ceiling?
No. Limewash is very thin, so cracks need filling and any loose plaster needs fixing before it goes on.
Can I limewash a bathroom ceiling?
Limewash copes with humid rooms better than many people expect, but a bathroom needs good ventilation and we check the ceiling first before advising.
Do you need to empty the room?
Ideally yes. If large furniture has to stay, it is moved to the middle and fully covered while we work.