Short answer: Tadelakt can make a striking, seamless wet room in a Plymouth home, but it only works if the room underneath is built properly, with sound walls, correct floor falls, waterproofing and a good extractor fan. It is a slow, hands on finish that needs several days on site and some simple care afterwards. Finest Plastering installs tadelakt and plans Plymouth jobs as one continuous block of work from Birmingham.
What tadelakt is
Tadelakt is a traditional Moroccan lime plaster. It is applied in coats, compressed and polished with smooth stones, then treated with an olive oil based soap often called black soap. The soap reacts with the lime and helps the surface resist water. The result is a soft, slightly uneven, very smooth finish with no grout lines.
It is different from microcement, which is a cement based coating sealed with a modern sealer. Tadelakt feels more natural and handmade, and it needs a little more care over its life.
Plymouth homes and wet rooms
Plymouth is a naval city with a long history, but much of its centre was rebuilt after heavy bombing in the Second World War. So alongside older streets such as the Barbican, there are many postwar houses and flats, plus newer homes and conversions such as those at Royal William Yard. Bathrooms range from small postwar rooms to larger spaces in modern builds.
Being on the coast, homes in Plymouth can be prone to condensation if ventilation is poor. That matters for any bathroom finish, and especially for tadelakt.
Getting the room ready
Most of the work that makes a tadelakt wet room last happens before we start. We need:
- Solid walls. Sound masonry or a suitable cement board, firmly fixed. Ordinary plasterboard is not suitable in the shower area.
- Waterproofing. A tanking membrane behind the finish, fitted by the builder or plumber, so water can never reach the wall even if the surface is damaged.
- Floor falls. A floor that slopes evenly to the drain, so water does not sit.
- Ventilation. An extractor fan that is powerful enough for the room, and ideally runs on after the shower is used.
We talk this through with your builder before the programme is fixed, and we will say if a room is not a sensible place for tadelakt.
Planning the trip from Birmingham
Plymouth is a long way from our Birmingham base, so we do not split a tadelakt job into scattered visits. We plan it as one block, with the team staying nearby, because the plaster has to be worked at the right moment as it firms up. Leaving and coming back would risk the finish.
We start with photos. Send pictures of the room from each corner, the floor, the ceiling and any window, with rough measurements and a note of what is behind the walls if you know. For a full wet room we often need a site visit, or a detailed call with your builder, before we can quote properly. Site visits are charged and we tell you the cost first.
After we finish, the room needs time before the first shower. We tell you exactly how long when we hand over.
Living with tadelakt
- Clean with gentle soap and water, not bleach or limescale removers.
- Wipe or squeegee the shower area after use to reduce marks.
- Apply a soap treatment from time to time to keep the surface protected.
- Expect fine marks and slight variation. That is part of the character.
Our tadelakt page covers the finish in more detail, and our Venetian plaster bathrooms page explains options for the rest of the room, away from the shower.
To start, send photos of your bathroom and rough sizes to get a free online quote, call 07592 929191 or email info@finestplastering.co.uk. More about how we cover the city is on our Plymouth page.
Questions we get asked
Is tadelakt waterproof on its own?
Treated tadelakt resists water well, but we always want a waterproof membrane behind it in showers and wet rooms.
Can tadelakt go on plasterboard?
Not in the shower area. It needs solid masonry or a suitable cement board, firmly fixed and waterproofed.
How do I clean it?
With mild soap and water. Avoid bleach, acids and limescale removers, which can damage the lime surface.